Public Folder from Office 365 to Office 365 - Migration Guide

Introduction

Welcome to the Public Folder Migration Guide From Office 365 to Office 365. This document will walk you through the environment preparation and MigrationWiz steps necessary to perform your migration. 

To discover what items are moved with MigrationWiz in this scenario, and which items will not be moved, see Moved Items. Note that these items will vary by source and destination, so check the proper environment listings carefully.

MigrationWiz is a migration tool, not a syncing tool. If changes are made at the source after migration, they will not sync to the destination, nor will changes made at the destination sync to the source. We do not have “live” monitoring of changes (as with a sync agent) and we cannot handle scenarios such as conflict resolution without user interaction.

MigrationWiz supports the capability to share migration projects across a Workgroup. When the Project Sharing feature is turned on, all Agents besides those who are Inactive can view all migration projects. For more information, visit Project Sharing in MigrationWiz.

 

Prepare Source Environment

  1. Grant elevated 'Organization Management' administrator role to the migrating administrator account (this grants permission to all necessary read-only fields). See How do I assign the elevated admin role 'Organization Management' to the account that is performing a Public Folder migration?
  2. Ensure that the source administrator account has permission to access all Public Folders (owner access rights need to be permitted to the account being used for migration). See How do I ensure the admin account being used for Public Folder migration has permissions on all Public Folders?
  3. The destination administrator account must have a valid Office 365 license assigned and an active mailbox in the Office 365 environment
  4. Split up large Public Folders. If any Public Folders contain more than 100,000 items, these should be split into multiple Public Folders. This will speed up your migration. See How do I find the size of source Public Folders?
  5. Any individual Public Folders that are over 20GB in size should be split up into smaller folders of 20GB or less. Failure to complete this step can negatively impact migration performance and speed.

Prepare Destination Environment

  1. This guide presumes that your Office 365 tenant and users have already been created and licenses have been assigned to those users. For instructions on setting up accounts and assigning licenses, see one of the articles below:
  2. The destination administrator account must have a valid Office 365 license assigned and an active mailbox in the Office 365 environment.
  3. Create the primary Public Folder mailbox and assign the administrator Owner permissions at the root of the Public Folder hierarchy. For more information see How do I create the Public Folder mailbox and database on Office 365?
  4. Grant Owner permission to the destination administrator at the root (IPM_SUBTREE) of the Public Folder hierarchy. See How do I ensure the admin account being used for Public Folder migration has permissions on all Public Folders?

 

MigrationWiz Steps

  1. Set up the Public Folder migration project. Read the How do I create a new migration project? article for more information.
  2. Create the source and destination Endpoints (select Office 365 Public Folder for both the source and destination Endpoints). For more information, see View, Add, and Edit Customer Endpoints.
  3. Add Public Folders (select Add > Quick Add and enter a forward slash ( / ) in the Root Folder Path field.) We recommend this because it will migrate all Public Folders, and you will only need one Public Folder license per 10GB of data, regardless of the number of top-level Public Folders. Refer to How do I select to migrate all my Public Folders from the root level down?
    Note: If targeting specific source folders for migration, an inclusive or exclusive folder filter will be needed. See our article here on Folder Filtering.
  4. Run Verify Credentials. See How do I verify credentials?
  5. If migrating more than 1000 folders, you will need to work with BitTitan Support to split the migration up so that the project runs more efficiently.
    • First step: run this PowerShell command against your source environment:
      Get-PublicFolder -Recurse -Resultsize Unlimited | select Identity | Export-Csv -Encoding Unicode C:\folders.csv
    • This will generate a file called folders.csv. Once you have that CSV, follow these steps:
      • Open the CSV and remove the names of any folders that will not be included in the migration.
        Note: Only folders included in the CSV will be included in the migration. Any new folders created after the Public Folder Split is initiated will not be included in the scope for the migration. For suggestions on working within this restriction, see Best Practices for migrating Public Folders.
      • If MIGRATING MORE THAN 20GB, STOP HERE AND CONTACT BITTITAN SUPPORT!
        • When migrating more than 20GB of data, scripts will need to be created for the project by BitTitan Support to avoid the automatic Office 365 auto-split process for Public Folder Mailboxes. For more information, see How do I migrate more than 20GB of Public folder data to Office 365? If the total size of the migration is less than 20GB, these scripts are not required.
        • Open a ticket with BitTitan Support.
          Notes:
          • If you already have a ticket open with BitTitan Support, this information can be added to the open ticket. The subject of the ticket should be “Public Folder Split and Foldermapping”
          • Once the MigrationWiz split process is complete, a new project will be created with “_SPLIT” in the title. You must run the migration from the new project.
        • After the Public Folder mappings scripts supplied by BitTitan support have been successfully run against the Office 365 tenant, we highly recommend performing the steps outlined under Office 365 as the destination for increasing public folder quotas and public folder mailbox size limits here. Best Practices for migrating Public Folders.
  6. Purchase Public Folder licenses. See How do I purchase licenses?
    Note: To obtain an estimate of the number of Public Folder migration licenses required for your migration project, follow the directions in How do I estimate the number of Public Folder migration licenses required?
  7. Set Project Advanced Options. See What project Advanced Options are available?
    • Set the value for Migrate Permissions For from New Folders Only to New folders and existing folders. This is required because Public Folder mapping scripts have been created. See How do I migrate Public Folder permissions?
    • Set value for Licensing/Maximum licenses to consume per item per pass licensing count. Default = 1. This allows up to 10GB to be migrated. Example: If migrating all Public Folders, using the forward slash ( / ), and the total data size = 78GB, then increase this value to 8 (otherwise the migration will pause at 10GB). See How do I enable consumption of multiple licenses for a single item?
    • Set your Preferred BitTitan Data Center. For fastest migration speeds, select the Data Center that is closest to your Office 365 destination tenant. Refer to How do I specify the data center to use for my migration?
    • Under Support Options add:
  8. Set first pass Project Advanced Options.
    • Under Support Options add:
      • MaintainWatermarkCompletionState=1
    • Set Date Filter to migrate items older than six (6) months. For more information see How do I set a Date Range filter?
  9. Perform first pass for items older than 6 months by running a full migration. Refer to How do I start a migration?
  10. Set second pass Project Advanced Options.
    • Under Support Options:
      • Remove MaintainWatermarkCompletionState=1
      • Add SkipImportFolderWhenPublicFolderExists=1
    • Set the Date Filter to migrate items newer than six (6) months. For more information see How do I set a Date Range filter?
  11. Perform a second pass for items newer than 6 months by running a full migration.
  12. Set Advanced Options for Security Group Permissions Pass.
    • Under Support Options:
      • Remove SkipImportFolderWhenPublicFolderExists=1
      • Add AllowAllMailboxTypesForPFPermissions=1
  13. Perform a Security Group Permissions pass by running a full migration. If you do not run this pass, none of the Security Group Permissions will migrate. For more information on Security Group permissions, see How do I allow Security Groups to be migrated during a Public Folder migration project?
  14. After the migrated Public Folders have been mail-enabled in Office 365, you can use the scripts supplied here to export and import the SMTP addresses for them: Migrating mail-enabled Public Folder email addresses.
  15. If the mail-enabled Public Folders need to accept mail from external domains, you will need to run the following PowerShell command against the destination tenant. For more information, see How to configure mail-enabled Office 365 Public Folders to accept mail from external domains?
    Get-PublicFolder -Recurse -ResultSize Unlimited | ? {$_.MailEnabled -eq $True} | Add-PublicFolderClientPermission -User Anonymous -AccessRights CreateItems
  16. Change your primary domain type in Office 365 from Authoritative to Internal Relay for domains being used in mail-enabled Public Folder SMTP addresses. For specific information, see How do I change the primary domain type in Office 365 from Authoritative to Internal Relay?
    Note: Without setting this, Office 365 bounces the message before it even checks whether a valid Public Folder address exists.
  17. Request the migration statistics. Click the bar chart icon on the MigrationWiz dashboard to receive an email containing all the project migration statistics. Refer to How do I request statistics for my migration project?
Was this article helpful?
0 out of 1 found this helpful